Measurement Guide for Bay Window Blinds

Measurement for bay window blinds is simple. Below is a relevant guide for a perfect fit bay window blind.

Tools required:

  • a metal tape measure
  • a pen or pencil
  • A paper or book
  • A few cards
measuring windowsmeasuring windows

Measuring the Width

STEP 01.

Take 2 straight-edged cards. With a pencil, mark a line parallel to the longer side of the card: 5cm for Roman Blinds and 7cm for Roller Blinds.

STEP 02.

At a height, you are planning to install the blinds, hold the cards in one hand against the wall such that the lines you’ve drawn touch. Mark the point where the front edges of the card touch the wall.

STEP 03.

From the outer edge of the window frame to the mark you made, measure the side windows. Measure the centre window between the two marks. Measure the height and installation height with the same procedure as that for blinds outside the recess in flat windows.

Measurement of Height

HEIGHT

Measure the height from where you are planning to install your blind to the window sill or bottom of the recess, whichever you need, from each window. We recommend installing your blind up to 30cm above the window frame.

INSTALLATION HEIGHT

Measure the height from the point at which you will install the blind to the floor for each window. This is to ensure your pull chain is at the correct height.

Once the perfect measurements are taken with our easy guide, enter the details in our online studio to customize your curtain and get a quick quote.