Measurement for Roller and Roman blinds for the flat windows is simple. Below is a relevant guide for a perfect fit flat window blind. The blinds can be fitted inside or outside the recess as per your preference. Depending on this factor, the procedure changes.
Tools required:
Measure the wall-to-wall distance inside the recess at the top, middle and bottom. The narrowest width needs to be considered.
At least from 3 points, measure the height inside the recess and consider the longest measurement.
Measure the height from where you are planning to install the blind to the floor. This is to ensure that your pull chain is at the correct height.
Once the perfect measurements are taken with our easy guide, enter the details in our online studio to customize your curtain and get a quick quote.
The window sill width is to be measured. Measure wall-to-wall distance inside the recess and add 10cm to each side, in the case if you don’t have a window sill.
From the point where you would like to install your blind to the window sill or bottom of the recess, measurement is to be taken. If we are to recommend, installing your blind up to 30cm above the window frame would be the best option.
Measure the height from where you are planning to install the blind to the floor. This is to ensure that your pull chain is at the correct height.
Once the perfect measurements are taken with our easy guide, enter the details in our online studio to customize your curtain and get a quick quote.
